Firmware Update Procedure

To upgrade your device from unIFY Control Panel, launch Smart Firmware Update from the Tools menu.

  1. Be sure you have downloaded the latest firmware version from the device list below.
  2. Click on the Select File button and locate the firmware package (.SFU file) on your computer.
  3. Once the desired file has been selected, the application will search for the devices that match the selected firmware package, and will also determine the relevant features that require updates on the device.

*Note: If either Dante™ lock or the parameter lock are active, the device will show up with a padlock next to it and the progress bar will be replaced by text indicating the device has an active lock. No updates will be possible in this device until the lock is removed.

To initiate an update, check the device or devices in the list with their associated checkbox and click on the Start button.

For further configuration assistance, download the unIFY User Manual for your product.

Surface-mount network audio interfaces

AES67 scalable mic/line connectivity interface

Release Notes:

v2.3.14 Released 12/2023
Feature Enhancements:

  • Added support for new processor hardware variant

Corrected Issues:

  • Fixed issue with checksum calculation on ICMP (Ping) responses
  • Fixed issue with SAP checksums changing unnecessarily invalidating previous streams reservations

v2.2.1.2 Released 2/2020
Enhancements:

  • Added USB connect/disconnect events and status
  • Added configurable HID telelphony logic and network events
  • Added support for configurable USB Audio UAC terminal types (line I/O, speakerphone)

Corrected Issues:

  • Impoved USB audio reliability
  • Corrected IGMP v3 compatibility issues
  • Out level metering is now compensated for outpad pad settings to reflect actual levels at the outputs.
  • Corrected errant reporting of amplifier faults when amplifier is powered down.
  • Improved AES67 reliability in large networks (>16 devices)

v2.1.1.0 Released 7/19
Initial Release

Dante/AES67 scalable mic/line connectivity interface

Release Notes:

v4.20 released 3/21

  • upgrade Ultimo Code to 4.2.2.3

v4.1.0 Released 6/20

  • Updated default channel names

v4.0.0 Released 10/18
Initial Release

Release Notes:

v1.2.0

  • Updated Ultimo firmware
  • Fixed a timer issue that could cause buttons to be unresponsive

Dante/AES67 network audio interface – 4x4 HDMI audio embedder/dembedder

Release Notes:

v1.6.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v1.5.0 Released: 10/2022

  • Resolved an issue that some devices would not display data correctly when connected through the unHX2D.

v1.3.0 Released: 2/20
Feature Enhancements:

  • Info coming soon

v1.2.0 Released: 9/18
Feature Enhancements:

  • Adds AES67 audio networking support

Note: AES67 support requires the UltimoX4 processor. Users can confirm their device has an Ultimo4X processor by using unIFY Control Panel and right clicking on a connected unHX2D device to show the device context menu. In this menu, the Dante Model should report “Ultimo4X”.

Corrected Issues:

  • Includes correct MDNS records for proper device discovery when used with Q-SYS plugins

v1.0.0 Released: 6/17
Initial release

Dante network audio interface – 2x2 mic/line IO

Release Notes:

v4.4.0 released 3/21

  • upgrade Ultimo firmware in products using UltimoX to 4.2.2.3
  • Products using Ultimo remain unchanged at 4.0.11.3

v4.3.0 Released: 6/20

  • Enabled AES67 in UXT variants

v4.2.0 Released: 10/19
Corrected Issues:

  • Corrected muting issue encountered when applying v4.10.0 firmware to devices with early revision hardware.

v4.1.0 Released: 8/19
Feature Enhancements:

  • General Ultimo 4.0.11.3 / UltimoX 4.1.6.7 firmware update

Corrected Issues:

  • Corrected parameter control issues for devices enrolled in a Dante Domain Manager system.

Known Issues:

  • On some older hardware, analog outputs may be muted by this update. If this occurs, contact Attero Tech Tech Support for assistance to correct this issue.

v4.0.0 Released: 5/18
Feature Enhancements:

  • Added support for Dante Domain Manager compatibility

Known Issues:

  • Device specific parameter control (ex. Preamp controls, phantom power, etc) will not work on –C interface products while enrolled in a DDM domain.
    Workaround: Use –U firmware option and a control system capable of sending 3rd party UDP commands for device specific control.
  • Sending a device specific parameter command (ex. . Preamp controls, phantom power etc)to units within 2 seconds after reset may result in settings not being applied correctly.
    Workaround: In order to reliably apply commands sent to a device from a controller, it is recommended to wait at least 8 seconds after a device. Alternatively, if it is not possible to confirm the exact time the device has reset and booted, the control application should periodically check the current device state and confirm the current settings against any requests made for parameter changes to the device.

v1.2.0 Released: 9/17
Feature Enhancements:

  • Added muting between gain changes to minimize audio pops and artifacts

Corrected Issues:

  • Corrected issue that caused devices to reset periodically. Reset interval was dependent on Dante processor version

Dante/AES67 network audio interface – 4x line outputs

Release Notes:

v4.7.0 released 3/21

  • upgrade Ultimo firmware in products using UltimoX to 4.2.2.3
  • Products using Ultimo remain unchanged at 4.0.11.3

v4.6.0 Released: 11/19
Feature Enhancements:

  • Update to latest Dante Ultimo code release

v4.5.0 Released: 8/18
Feature Enhancements:

  • Enabled AES67 support (Note: This requires the UltimoX processor. Fielded products prior to 3/2018 may not be equipped with UltimoX)

v4.4.0 Released: 3/18
Feature Enhancements:

  • Added support for Dante Domain manager

v4.3.0 Released: 4/17
Feature Enhancements:

  • Dante lock functionality is now supported for Dante parameters

Corrected Issues:

  • Prior to this update, this product would stop receiving audio from another Dante device if left to run for more than 48 days. This firmware update resolves this issue

IP Paging Stations

Dante/AES67 4-zone paging station

Release Notes:

v1.8.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v1.7.0 released 3/2021

  • upgrade Ultimo Code to 4.2.2.3

v1.6.0 Released: 6/20

  • Added paging modes

v1.5.0 Released: 9/18
Initial release

Dante/AES67 4-zone paging station

Release Notes:

v1.8.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v1.7.0 released 3/2021

  • upgrade Ultimo Code to 4.2.2.3

v1.6.0 Released: 6/20

  • Added paging modes

v1.4.0 Released: 1/19
Initial release

Audio Monitoring

Dante networked audio monitor

Release Notes:

v4.6.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v4.5.0 released 3/2021

  • upgrade Ultimo firmware in products using UltimoX to 4.2.2.3
  • Products using Ultimo remain unchanged at 4.0.11.3

v4.4.0 Released: 6/20

  • Added keypad lockout feature

v4.3.2 Released: 4/19
Feature Enhancements:

  • Added support for single port network mode
  • Updated to Ultimo firmware version 4.0.10.2(ULT) / 4.1.4.2 (UXT). For units with UltimoX processors, AES67 streams may now be assigned to the unDNEMO through Dante Controller, dynamic subscription of these streams is not supported.
  • When updating firmware, the display will report the firmware update status.

Corrected Issues:

  • Keypad no longer flashes after an inactivity timeout.
  • Corrected audio anomaly when switching to USB mode with actively monitored source

v4.2.0 Released: 11/17
Feature Enhancements:

  • Migrated firmware package to use Smart Firmware Update utility
  • Added 3rd party commands to match functionality of unDNEMO-BT
  • Added selectable TX source functionality to match functionality of unDNEMO-BT
  • Added stereo channel monitoring to match functionality of unDNEMO-BT

Corrected Issues:

  • Corrected audio anomalies present on Dante TX output when in All Input monitoring mode.

v1.2.0 Released: 4/17
Feature Enhancements:

  • Dante lock functionality is now supported for Dante parameters

Corrected Issues:

  • Prior to this update, this product would stop receiving audio from another Dante device if left to run for more than 48 days. This firmware update resolves this issue.

Network Amplifiers

Network Amplifiers

Release Notes:

v1.1.0 Release: 12/23

Feature Enhancements:

  • Added support for Brooklyn 3 based hardware variants

Rackmount Network Audio Interfaces

Dante/AES67 networked audio interface – 16ch I/O

Release Notes:

v1.3.0 Release: 12/23
Feature Enhancements:

  • Added support for Brooklyn 3 based hardware variants

v1.2.0 Released: 6/20

  • Updated to Dante FW version 4.2.0.28
  • Changed minimum screen timeout to 10 seconds
  • Disabled Telnet and FTP access

v1.1.0 Released: 3/19
Feature Enhancements:

  • Added output polarity inversion to 3rd party API command set
  • Added the ability to retrieve the device's Dante lock state via the 3rd party API command set.

Corrected Issues:

  • Corrected display startup delay
  • Corrected issue with display timeout not awaking after an "Identify" command received
  • Corrected polarity inversion issue of the even numbered output channels.
  • Implemented security patches to eliminate TelNet and FTP access to Dante processor
  • Corrected issue with internal supply monitoring that could cause the D16Mio to enter "SAFE MODE" after a power loss event
  • Corrected issue on boot that muted all output channels if a headphone was plugged in during power up.V
  • Output volume commands received over the network properly update the display, if the output channel screens are active

V1.0.0 Release: 5/18

  • Initial release

Dante/AES67 networked audio interface – 32ch inputs

Release Notes:

v1.1.0 Release: 12/23

Feature Enhancements:

  • Added support for Brooklyn 3 based hardware variants

v1.0.0 Released: 10/19

  • Initial release

Dante/AES67 networked audio interface – 32ch out

Release Notes:

v1.2.0 Release: 12/23
Feature Enhancements:

  • Added support for Brooklyn 3 based hardware variants

v1.1.0 Release: 8/19
Feature Enhancements:

  • Updated to Brooklyn2 Dante processor firmware v4.2.0.28
  • Adds support for ST2110-30 audio compatibility
  • Improved support for latest Dante Domain Manager firmware compatibility and features
  • The device now reports the Dante lock status via the 3rd party API
  • Output channel polarity inversion now supported via the 3rd party API

Corrected Issues:

  • Corrected minimum display timeout, minimum is now 10 seconds
  • If front panel lockout is activated  when the user is editing parameters from the front panel, the display will exit to menu navigation mode.
  • FTP and Telnet access is now restricted
  • Display no longer times out and turns off during an update. Firmware update progress is now shown.
  • Corrected power supply monitoring error that could cause an errant 24V Safe Mode warning and halt the device
  • GSTAT command now includes the Dante lock state

v1.0.0 Release: 5/18

  • Initial release

Wall-mount network audio interfaces

Dante/AES67 network audio wall plate – 2x mic/line in

Release Notes:

v1.1.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

Dante/AES67 network audio wall plate - 4x2 mic/line IO

Release Notes:

v4.12.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v4.11.0 released 3/2021

  • upgrade Ultimo firmware in products using UltimoX to 4.2.2.3
  • Products using Ultimo remain unchanged at 4.0.11.3

v4.10.0 Released: 12/19
Feature Enhancements:

  • Enabled AES67 support

Corrected Issues:

  • Corrected error that could unroute audio when retrieving the channel labels

v4.9.0 Released: 9/19
Corrected Issues:

  • Corrected output muting problems when v4.8.0 was applied to early hardware revisions of the product.

v4.8.0 Released: 8/19
Feature Enhancements:

  • General Ultimo 4.0.11.3 / UltimoX 4.1.6.7 firmware update

Corrected Issues:

  • Corrected parameter control issues for devices enrolled in a Dante Domain Manager system.

Known Issues:

  • On some older hardware, analog outputs may be muted by this update. If this occurs, contact Attero Tech Tech Support for assistance to correct this issue.

v4.6.1 Released: 10/18
Corrected Issues:

  • Corrects firmware update vulnerability

Note: Prior to this update, if a device failed an update and entered the Dante processor fail-safe mode, further updates would fail. If you encounter this issue while updating to v4.6.1 please contact technical support at Attero Tech.

v4.6.0 Released: 6/18
Feature Enhancements:

  • Improved support for latest Dante Domain Manager firmware compatibility

Corrected Issues:

  • Corrected CODEC initialization issue
  • Corrected device Lock handling while in a DDM Domain

Note: While enrolled, the Dante Lock status is replaced by the domain enrollment status and not available while enrolled

v4.5.0 Released: 3/18
Feature Enhancements:

  • Added support for Dante Domain Manager
  • Added Support for signal presence detection via 3rd Party UDP protocol

v4.3.0 Released: 4/17
Feature Enhancements:

  • Dante lock functionality is now supported for Dante parameters

Corrected Issues:

  • Prior to this update, this product would stop receiving audio from another Dante device if left to run for more than 48 days. This firmware update resolves this issue.

Dante/AES67 network audio wallplate – 4x2 multi-IO

v4.14.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v4.13.0 released 3/2021

  • upgrade Ultimo firmware in products using UltimoX to 4.2.2.3
  • Products using Ultimo remain unchanged at 4.0.11.3

v4.12.0 Released: 2/2020
Feature Enhancements:

  • Enabled AES67 support for products with UltimoX4 processors

v4.11.0 Released: 9/2019
Corrected Issues:

  • Corrected muting issue encountered when applying v4.10.0 firmware to devices with early revision hardware.

v4.10.0 Released: 8/2019
Feature Enhancements:

  • General Ultimo 4.0.11.3 / UltimoX 4.1.6.7 firmware update

Corrected Issues:

  • Corrected parameter control issues for devices enrolled in a Dante Domain Manager system.

Known Issues:

  • On some older hardware, analog outputs may be muted by this update. If this occurs, contact Attero Tech Tech Support for assistance to correct this issue.

v4.8.0 Released: 12/2018
Corrected Issues:

  • Updated Dante processor firmware to correct possible power up issue with static IP assignment on UltimoX equipped products
  • Corrected issue with firmware update process that prevented future updates if the product enters fail safe mode

Known Issues:

  • If an update fails and the product enters fail-safe mode, Dante Firmware Updater Manager must be used to recover and apply the correct DNT file. Please contact Attero Tech Technical Support if this condition occurs.

v4.7.0 Released: 5/2018
Feature Enhancements:

  • Improved support for latest Dante Domain Manager firmware compatibility

Corrected Issues:

  • Corrected CODEC initialization issue.
  • Corrected device Lock handling while in a DDM Domain.

NOTE: While enrolled, the Dante Lock status is replaced by the domain enrollment status and not available while enrolled.

Known Issues:

  • Device specific parameter control (ex. Preamp controls, phantom power, etc) will not work on –C interface products while enrolled in a DDM domain.
    Work around: Use –U firmware option and a control system capable of sending 3rd party UDP commands for device specific control
  • Sending a device specific parameter command (ex. . Preamp controls, phantom power etc) to units within 2 seconds after reset may result in settings not being applied correctly.
    Work around: In order to reliably apply commands sent to a device from a controller, it is recommended to wait at least 8 seconds after a device. Alternatively, if it is not possible to confirm the exact time the device has reset and booted, the control application should periodically check the current device state and confirm the current settings against any requests made for parameter changes to the device.

v4.6.0 Released: 4/2018
Feature Enhancements:

  • Upgraded Dante firmware to use latest DDM supported firmware

Corrected Issues:

  • Added support for detecting and correction of mismatched device settings that may occur after an environmentally induced ESD (electrostatic discharge) event.

v4.5.0 Released: 3/2018
Feature Enhancements:

  • Added support for Dante Domain Manager
  • Added support for signal presence detection via 3rd Party UDP protocol

v4.3.0 Released: 4/2017
Feature Enhancements:

  • Dante lock functionality is now supported for Dante parameters

Corrected Issues:

  • Prior to this update, this product would stop receiving audio from another Dante device if left to run for more than 48 days. This firmware update resolves this issue.

Dante/AES67 network audio wallplate with Bluetooth – 4x2 multi-IO

Release Notes:

v4.12.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v4.11.0 Released: 7/2022

  • Update Dante firmware for UltimoX-based products
  • Added support for the new Bluetooth module

v4.10.0 Released: 6/20

  • Improved Bluetooth connection functionality
  • Added Priority Paging list
  • Added Bluetooth Signal Strength diagnostic

v4.9.0 Released: 11/19
Corrected Issues:

  • Corrected muting issue encountered when applying v4.8.0 firmware to devices with early revision hardware.
  • Corrected issue with Bluetooth interface locking up after repeated user pairings

v4.8.0 Released: 6/19
Feature Enhancements:

  • Enabled AES67 interoperability mode support

Corrected Issues:

  • Improved pairing connect reliability by extending connection interval to 60 seconds and extending timer 10 seconds if active pairing / connect request is received at end of regular connection interval time period.
  • Improved firmware update reliability and allow future updates to be applied with the Smart Firmware Update in the event that a failure occurs.
  • Improved Bluetooth AVRCP pass through data integrity

Known Issues:

  • On some older hardware, analog outputs may be muted by this update. If this occurs, contact Attero Tech Tech Support for assistance to correct this issue.

v4.7.0 Released: 2/19
Corrected Issues:

  • Updated Dante processor firmware to correct possible power up issue with static IP assignment on UltimoX equipped products
  • Corrected issue with firmware update process that prevented future updates if the product enters fail safe mode

Known Issues:

  • If an update fails and the product enters fail-safe mode, Dante Firmware Updater Manager must be used to recover and apply the correct DNT file. Please contact Attero Tech Technical Support if this condition occurs.

v4.6.0 Released: 6/18
Feature Enhancements:

  • Added support for Dante Domain Manager
  • Added call and media bridging options
  • Added new pairing modes
  • Added AVRCP pass through control

Corrected Issues:

  • Dashes removed from channel names to prevent routing issues with QSC DSP's

v4.3.0 Released: 4/17
Feature Enhancements:

  • Dante lock functionality is now supported for Dante parameters.
  • Pairing list depth increased to 10 devices before pairings are discarded.

Corrected Issues:

  • Prior to this update, this product would stop receiving audio from another Dante device if left to run for more than 48 days. This firmware update resolves this issue
  • Corrected issue with random pairing problems after more than 6 devices paired to the unD6IO-BT

Known Issues:

  • Dashes in channel names cause issues when Q-Sys Designer used to route Dante audio

Dante/AES67 network audio wallplate – 4x2 mic/line IO

Release Notes:

v4.11.0 released 9/2024

  • Update to Dante Firmware to support Dante Director

v4.10.0 released 3/2021

  • upgrade Ultimo firmware in products using UltimoX to 4.2.2.3
  • Products using Ultimo remain unchanged at 4.0.11.3

v4.9.0 Released: 9/19
Feature Enhancements:

  • AES67 interoperability mode now supported

Corrected Issues:

  • Corrected muting issue encountered when applying v4.8.0 firmware to devices with early revision hardware.

v4.8.0 Released: 8/19
Feature Enhancements:

  • General Ultimo 4.0.11.3 / UltimoX 4.1.6.7 firmware update

Corrected Issues:

  • Corrected parameter control issues for devices enrolled in a Dante Domain Manager system.

Known Issues:

  • On some older hardware, analog outputs may be muted by this update. If this occurs, contact Attero Tech Tech Support for assistance to correct this issue.

v4.6.0 Released: 5/18
Feature Enhancements:

  • Added support for Dante Domain Manager

Corrected Issues:

  • Device Lock now only reports when decvice is not enrolled in a Dante domain

v1.1.0 Released: 9/17
Feature Enhancements:

  • Added muting between gain changes to minimize audio pops and artifacts

Corrected Issues:

  • Corrected issue that caused devices to reset periodically. Reset interval was dependent on Dante processor version.

Network Wall Controllers

Single-gang network audio controller

Release Notes:

v1.5.0 Released: 8/2020
Feature Enhancements:

  • Resolves congestion issues when installed in large networks

v1.4.0 Released: 1/2020
Feature Enhancements:

  • Support added for communicating directly with Attero Tech endpoint devices via the Attero Tech 3rd party APIs.

v1.3.1 Released: 10/2019
Feature enhancements:

  • Added 3rd party mode support, using unIFY Control Panel, the C1 may now be configured to act as a general purpose AV system controller for 3rd party networked products that feature 3rd party control
  • Added multiple level controls to menu screens (3rd party mode only)
  • Added display rotation option

v1.2.0 Released: 5/2019
Feature Enhancements:

  • Added Device Info screen
  • Added menu button event support for use in QSYS plugins
  • Added support for dynamic volume screen title for use in QSYS plugins

Corrected Issues:

  • Unsupported fonts now shown as a single character
  • Increased command payload to 54 bytes max
  • Factory reset from front panel is now prevented when device is in locked state

v1.1.0 Released: 2/2019

  • Initial release

Discontinued Products

AES67 Network Audio Endpoint (4x4)

Release Notes:

v2.2.1.1 Released 2/2020
Initial release

AES67 Network Audio Endpoint (8x8)

Release Notes:

v2.2.1.1 Released 2/2020
Initial release

Dante/AES67 networked audio interface – 32ch inputs

Release Notes:

v1.2.0 Released: 6/20

  • Updated to Dante FW version 4.2.0.28
  • Changed minimum screen timeout to 10 seconds
  • Disabled Telnet and FTP access

v1.1.0 Released: 5/18
Feature Enhancements:

  • Improved support for latest DDM firmware compatibility
  • Added GSTAT command to retrieve device state in a single 3rd party API call

v1.0.0 Released: 7/17

  • Initial release

Dante/AES67 rackmount audio monitor

Release Notes:

v1.3.0 Released: 6/20

  • Updated to Dante FW version 4.2.0.28
  • Changed minimum screen timeout to 10 seconds
  • Disabled Telnet and FTP access

v1.1.1 Release: 7/18

  • Initial release

AES67 networked audio wall plate – 4x2 multi-IO

Release Notes:

v1.1.1.2 Released: 03/2020

AES67 networked audio wall plate w/ Bluetooth – 4x2 multi-IO

Release Notes:

v1.1.1.3 Released: 03/2020

AES67 networked audio interface – 2x2 mic/line IO

Release Notes:

v1.1.1.2 Released: 03/2020

AES67 networked audio wallplate – 4x2 mic/line IO

Release Notes:

v1.2.1.2 Released 03/2020

AES67 networked audio wallplate – 4x2 mic/line IO

Release Notes:

v1.1.1.2 Released: 03/2020

Bluetooth in-wall audio interface

Release Notes:

v1.4 Released: 6/20

  • Added Priority Pairing list
  • Added Bluetooth Signal Strength diagnostic

v1.3 Released 11/19
Corrected Issues:

  • Corrected issues related to Bluetooth pairing

v1.2 Released: 6/19
Feature enhancements:

  • Added the audio mode and output level settings to the serial control port for real-time control and configuration via RS-232

Corrected issues:

  • Corrected audible pop when forcing disconnect
  • Corrected mono output issue, CH1 = 50% left + 50% right, CH2 = 100% right

v1.1 Released: 2/17
Corrected Issues:

  • Corrected issue with random pairing problems after more than 6 devices paired to the unBT2A
  • Pairing list depth increased to 10 devices before pairings are discarded

v1.0 Released: 10/16

  • Initial release

Dante networked audio wallplate – 2x2 multi-IO

Release Notes:

v4.4.0 Released: 03/2020

Dante/AES67 networked audio interface – 32 line level analog outputs

Release Notes:

v3.2.0 Released: 03/2020

Dante/AES67 network audio interface – 4x mic/line inputs with logic IO

Release Notes:

v4.10.0 released 3/21

  • upgrade Ultimo firmware in products using UltimoX to 4.2.2.3
  • Products using Ultimo remain unchanged at 4.0.11.3

v4.9.0 Released: 6/20

  • Resolved issue with input hum on restart when using phantom-powered microphones

v4.8.0 Released: 5/19
Feature Enhancements:

  • Added AES67 support for devices with UltimoX processors (UXT FW: v4.1.4.2)
  • Added configurable control port mode (independent VLANs).

Corrected Issues:

  • Removed double carriage returns on all NACK'd commands

v4.4.0 Released: 12/17
Feature Enhancements:

  • Added option that allows QSC plug-in to discover unD4I-L devices.

Corrected Issues:

  • Fixed compatibility issue with host processor firmware when running on hardware using the UltimoX processor.

v4.3.0 Released: 4/17
Feature Enhancements:

  • Dante lock functionality is now supported for Dante parameters

Corrected Issues:

  • Prior to this update, this product would stop receiving audio from another Dante device if left to run for more than 48 days. This firmware update resolves this issue.

v4.1.4 Released: 7/16
Feature Enhancements:

  • Upgraded to use Audinate’s Ultimo firmware version V2.2.3.5
  • Enabled Dante Identify function (flashes power LED when activated from Dante Controller)
  • Added support for 88.1 and 96kHz sample rates

Notes: Requires MCU firmware to be updated to v3.5 or later

Dante networked audio interface – 4ch AES3 digital output

Release Notes:

v4.4.0 Released: 03/2020

Dante networked audio monitor with Bluetooth connectivity

Release Notes:

v.4.4.0 Released: 05/2020

Dante networked audio interface – 2x2 mic/line IO

Release Notes:

v4.3.0 Released: 4/17

Dante/AES67 networked audio interface – 2x2 plug and play USB connectivity

Release Notes:

v4.7.0 Released: 03/2020

Dante networked audio wallplate

Release Notes:

v4.3.0 Released: 6/17